Round Jars

Capacity	Dimensions		Label
ml	dia (cm)	height (cm)	height (cm)	width (cm)
150
225	65	91	44	197
300	64	110	59	197
450	81

Winding Direction:	Generally printed or clear lacquer side is out with heat Seal coating inside.
Core:	Material options: (a) Plastic (b) Aluminium (c) Card Board
Core ID :	76 mm +/- 0.5 mm
	The length of the core is equal to the width of the web.
Splices :	Butt type made with 25 mm pressure sensitive tape.
Reel Outer Diameter :	250 +/- 10 mm for slit material, 400 +/- 10 mm for Jumbos
Reel Wander :	Within +/- 1 mm
Reel/Web Width :	Plain: 45mm to 800 mm with a tolerance of +/- 0.5 mm.
	Printed: 45mm to 600 mm with a tolerance of +/- 0.5 mm
Joints Per Reel :	Maximum 2. Average less than 1.
Pin Holes :	0.025 and 0.03 mm foils are free from pin holes.
	In 0.02 mm foil, 40% of foil is free from pin holes, rest less than 10 PSM

We also supply a range of soft Aluminium Foils suitable for strip packaging of Pharmaceutical products such as Tablet, Capsules, etc. With the following general specifications. The final product specifications are made as per agreed contract with the customers.

FOIL MATERIAL :
Soft fully annealed aluminium alloy AA 8011 / AA 1200 conforming to Aluminium Association specification.

Std Foil Gauge Options	Tolerance ( +/-8% )	Min. Bursting Strength
0.025 mm	+/- 0.002 mm	1.5 kg/sq. cm
0.030 mm	+/- 0.0024 mm	1.9 kg/sq. cm
0.040 mm	+/- 0.0032 mm	2.5 kg/sq. cm

We also supply foils of three ply having the following structure:

Polyester / Foil / Poly :
This 3 ply is suitable for packing conventional products like confectionery, tea, consumables etc. The final product specifications are made as per agreed contract with the customers based on the type of products that are to be packed. Polyester to foil and foil to poly lamination is done by dry lamination.

Foil Material :
Soft aluminum packaging foil made from alloy AA 1200 / AA 1235 / AA 8011 conforming to Aluminium Association specification.
The quality of foil is as per our light gauge foil specification.

Polyester :

Standard Thickness (micron)	Tolerance (± 10%)
10	± 1
12	± 1.2

Poly :
Colorless poly conforming to the applicable Government regulations as a sealant layer.

Standard Poly Thickness (micron)	Tolerance (± 15%)
37.5 (150 gauge)	± 5.625
25 (100 gauge)	± 3.750
45 (180 gauge)	± 6.750